Changing The Number Plate And Brake Light Bulbs - Ducati MULTISTRADA 1000DS S Anleitung- Und Instandhaltungsheft

Changing the number plate and brake light bulbs

Unscrew the two screws (1) securing the rear light mounting
to the number plate holder on the inside of the holder.
Unscrew the screw (2) and pull the rear light mounting off
a short way (fig. 66).
Disconnect the connector (A) of the rear wiring harness
and remove the rear light mounting (fig. 67).
1
A
2
E
fig. 66
fig. 67
75