Charging the battery (fig. 53)
Before charging the battery, it is best to remove it from
the motorcycle.
Remove left side fairing (page 59Always disconnect the
black negative terminal (-) first, and then the red positive
terminal (+).
Unscrew the two screws (1) securing the battery brackets
E
and remove the battery from the battery compartment.
Warning
Batteries develop explosive gases: keep it away
from heat sources and flames.
Charge the battery in a ventilated room.
Connect the red battery charger lead to the positive (+)
terminal on the battery, and the black lead to the
negative (-) terminal.
Important
Always connect up the battery before switching the
battery charger on: failure to do so can result in sparking
at the battery terminals that could ignite the gases inside
the cells.
Always connect the red positive terminal (+) first.
Reinstall the battery on its mount and secure the brackets
with the screws (1). Connect the terminals. Use some
grease on the fastening screws to improve conductive
capacity.
66
+
1
Warning
Keep the battery out of the reach of children.
Charge the battery at 0.9 A for 5-10 hours.
-
fig. 53