Ducati MULTISTRADA 1000DS S Anleitung- Und Instandhaltungsheft Seite 117

Odometer function (fig. 10)
Gives total distance covered.
Trip counter function (fig. 10)
Gives distance covered since last resetting. This
parameter can be reset at any time by entering the
function and pressing button A fig. 5for at least 2 seconds.
E
When the display reaches 9999.9 km (or miles) it resets
itself automatically.
When this parameter is reset also the following parameters
are reset: average speed, average consumption, and fuel
used.
Average speed function (fig. 10)
Shows average motorcycle road speed.
The average speed is calculated starting from the most
recent trip counter reset.
When the motorcycle reaches 280 Km/h (174 mph) the
display shows a series of lines " - - - ".
Instantaneous fuel consumption function (fig. 10)
When the motorcycle is travelling with the engine running
the display will show a numerical value corresponding to
the instantaneous fuel consumption. If the motorcycle is
stopped with the engine running the display will show
steady lines " - -. - ". With the engine stopped and the
motorcycle at a standstill the display shows "0.0".
fig. 10
18