Ducati MULTISTRADA 1000DS S Anleitung- Und Instandhaltungsheft Seite 172

Remove the burned out bulb (10) and fit the new one,
taking care not to touch the glass (fig. 62).
Parking light.
Disconnect the connectors (11) from the terminals
(fig. 63).
Remove the parking light bulb (12) from its holder and fit a
new one of the same rating.
Refitting the lamps
After making all the necessary replacements, reconnect to
the relative bulb connectors the cable connectors that
were previously detached. Reposition the headlight cover
in its location, taking care to match the profile, and secure
it to the headlight body by tightening the retaining clips.
Notes
It is possible to invert the wires to the bulb terminals.
10
fig. 62
12
11
fig. 63
73
E