Ducati MULTISTRADA 1000DS S Anleitung- Und Instandhaltungsheft Seite 157

Movable fairing
Unscrew the four screws (1) securing the movable fairing
to the brackets with the seal (2).
Remove the movable fairing complete with the windshield
(fig. 44.1).
To replace the windshield, use the special torx wrench to
unscrew the screws (3) and nylon washers (4), while
E
holding the rubber coated nuts (5) in position from the
inside of the fairing (fig. 44.2).
When fitting the new windshield, tighten the screws (2)
starting with the central screw.
Make sure that the seals (2) are correctly fitted to the
brackets, then fit the movable fairing and secure it with the
screws (1).
Tighten the screws (1).
58
2
1
5
4
3
fig. 44.1
fig. 44.2