New Plc Configuration For The Valve System - Aventics AV Systembeschreibung

AVENTICS | Bus Coupler AES/Valve Driver AV, CANopen | R412018137–BAL–001–AE

12.7 New PLC configuration for the valve system

Configuration error!
An incorrect valve system configuration can cause malfunctions in and damage to the overall
system.
The configuration may therefore only be carried out by an electrical specialist!
Observe the specifications of the system owner as well as any restrictions resulting from the
overall system.
Observe the documentation of your configuration program.
After converting the valve system, you need to configure the newly added components. To do so,
you have to generate a new EDS file corresponding to the present valve system.
If you have exchanged components without changing their order, you do not need to reconfigure
the valve system. All components will be recognized by the controller.
For the PLC configuration, proceed as described in section 5 "PLC Configuration of the Valve
System" on page 90.
Conversion of the Valve System
NOTICE
121