6.11 Control Layout "N - Jungheinrich EFG 113 Betriebsanleitung

6.11 Control layout "N"

WARNING!
Ensure there are no other people standing underneath the raised load and
driver's cab.
Do not stand on the load handler.
Do not lift other people on the load handler.
Instruct other people to move out of the hazardous area of the truck.
Never stand underneath a raised and unsecured load handler / driver's cab.
Z
With control layout "N", the lift and tilt functions are swapped compared with the
standard operation. The Multipilot must only be operated from the driver's seat. The
driver must be instructed in how to handle the lift mechanism and the attachments!
NOTE
The lift/lower and tilt speeds are determined by the inclination of the Multipilot.
Avoid placing the load unit down suddenly to avoid damaging the load and the
racking.
Lifting
Procedure
• Push the Multipilot to the right (direction H) to raise the load.
• Push the Multipilot to the left (direction S) to lower the load.
Tilting
CAUTION!
Trapping hazard from inclined mast
When tilting the mast back, keep all
parts of your body from between the
mast and the front wall.
Procedure
• Push the Multipilot forward (direction V) to tilt the load forward.
• Pull the Multipilot back (direction R) to tilt the load back.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
V
S
R
H
105