Herunterladen Inhalt Inhalt Diese Seite drucken

Lifting The Truck By Crane - Jungheinrich EFG 113 Betriebsanleitung

Elektro-fahrersitz-gabelstapler
Vorschau ausblenden Andere Handbücher für EFG 113:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2.2

Lifting the truck by crane

CAUTION!
The mast can get damaged
Loading by crane is only intended for the initial transport before the truck is used
for the first time.
Loading must be carried out by specially trained staff in accordance with
recommendations contained in Guidelines VDI 2700 and VDI 2703
DANGER!
Crane slings can tear, resulting in accidents
Only use crane lifting gear with sufficient capacity.
Loading weight = Net weight of truck (+ battery weight for electric trucks).
The mast must be tilted back fully.
The crane lifting gear on the mast must have a minimum clear length of 2 m.
Crane slings should be fastened in such a way that they do not come into contact
with any attachments or the overhead guard when lifting.
Do not stand under a swaying load.
Z
Truck net weight: (see "Data plate" on page 28).
Lifting the truck by crane
Requirements
– Park the truck securely, (see "Parking the
truck securely" on page 70).
Procedure
• Secure the crane slings to the attachment
points (42) and (43.
• Raise and load the truck.
• Lower and deposit the truck carefully ((see
"Parking the truck securely" on page 70)).
• Secure the truck with wedges to prevent it from rolling away.
This concludes the loading by crane.
32
42
43

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Efg 110Efg 110kEfg 115

Inhaltsverzeichnis