Emergency mast lowering - Multi Pilot
Requirements
– Load handler is not in the rack.
– Turn the Emergency Disconnect switch and key switch off.
– Disconnect the battery.
– Remove the panel, push the steering column forward and pull the cover (49)
forward until it engages.
Procedure
• Slowly turn the emergency lowering valve (128); the mast and load handler will
lower.
• Turn the emergency lowering valve (128) in the opposite direction as far as the
stop; the lowering process stops.
The mast is now lowered.
WARNING!
Only return the truck to service when you have identified and rectified the fault.
110
49
128