Adding Window Washer System Fluid - Jungheinrich EFG 113 Betriebsanleitung

The oil is now drained.
Adding oil
Procedure
• Insert the oil drain plug (135).
• Remove the cap (132).
• Turn the steering axle wheel until the filler bore (133) is visible.
• Unscrew the oil control screw (134) and add new gear oil in the filler hole (133).
The oil has now been added.
6.6

Adding window washer system fluid

Procedure
• Make sure there is sufficient window fluid in
the container (136).
136
• If necessary top up with anti-freeze.
141