Technical Data; Product Identification - Franke Frames FS 982 M Bedienungsanleitung

EN

TeChnICal daTa

Product identification

Type: OE-9D
Model: FS 982 M BK DCT TFT
Refer to the data plate
X X
placed on the product.
This appliance complies with the following EC
Directives:
– 2006/95/EC (Low Voltage)
– 2004/108 EEC (Electromagnetic Compatibility)
The energy efficiency class (according to 2009 /
60350-50304 / EN) is determined by operating
modes: Energy Saving and Statics.
To calculate the volume, if present, remove the inner
side of the guide wire (according to regulations 2009
/ 60350-50304 / EN).
Parameter
Model identification
Oven type
Appliance weight
Number of cavities
Heat source of each cavity
Volume of each cavity
Energy consumption required to heat a standard
load in a cavity of an electric oven during a cycle
in convection mode for each cavity
Energy consumption required to heat a standard
load in a cavity of an electric oven during a cycle
in forced air circulation mode for each cavity
Energy efficiency ratio for each cavity
The manufacturer provides continuously product
enhancements. For this reason, the text and the
illustrations in this manual may be changed without
notice.
Further information on technical data is available on:
www.franke.com
FS 982 M
Parameter
Working dimensions of
the oven (mm)
Power supply voltage and
frequency
Total power and fuse
rating
Power and heating element values
Radial motor
Light bulb
Tangential fan
Roof
Floor
Grill
DCT heating elements
Symbol
FS-CR
M
V
EC electric cavity
EC electric cavity
EEI cavity
– 38 –
Value
480 x 370 x 405
(W x H x D)
220-240 V, 50/60 Hz
2900 W, 16 A
27 ... 40 W
40 W (2x)
15 ... 35 W
520 W / 124 V
1250 W
2100 W
2650 W
Value Unit of measure
913-982 DCT
built-in
41 kg
1
electric
74 l
1.12 kWh/cycle
0.53 kWh/cycle
61