Flyer C SERIE Anleitung Seite 245

Lift .the .unlocking .bolt .(2).
The .handlebars .can .now .be .turned .sideways .(3). .
The . bolt . automatically . latches . in . the . 90-degree .
position . (4). . Completely . close . the . quick-release .
lever .so .that .the .handlebars .are .safely .fastened.
90°
Turning . back . the . handlebars: . Lift . the . unlocking .
bolt .(1).
Then .turn .the .handlebars .back .to .the .riding .posi-
tion .(2). .The .bolt .must .be .re-latched .(3).
90°
2
3
4
1
2
3
Completely .close .the .quick-release .lever .(4).
4
The .Speedlifter .quick-release .lever .must .
be completely closed during the ride,
just .like .any .other .quick-release .fasten-
er. .It .must .also .be .ensured .that .the .un-
locking . bolt . is . latched . in . the . front . hole. .
Never . adjust . the . handlebars . while . rid-
ing.
Read the instructions of the component
manufacturer and for more information
visit: .www.speedlifter.com.
Adjusting the stem
For . all . stems, . please . read . the . instruc-
tions .supplied .by .the .manufacturer. .Only .
allow . FLYER . specialists . to . work . on . the .
handlebars .and .stem.
The following stem types are installed on
FLYERS: .
A-head stem
Adjustable stem
Adjustable .stem .
The . incline . of . the . stem . can . be . adjusted . to . your .
requirements. . D epending . o n . t he . m odel, . t he . l ateral .
or internal fastening screw must be loosened and
tightened . again . after . adjustment . with . the . correct .
fastening .torque.
45
Fastening screw
EN