TR-Electronic 582 Serie Gesamt-Bedienungsanleitung Seite 39

Basic safety instructions
2.6 Usage in explosive atmospheres
The standard measuring system must be installed in an appropriate explosion protection enclosure as
required when used in explosive atmospheres.
The products are labeled with an additional
The "intended use" as well as any information on the safe usage of the ATEX-compliant measuring
system in explosive atmospheres are contained in the
Standard measuring systems that are installed in the explosion protection enclosure and are intended
for use with safety instrumented applications can therefore be used in explosive atmospheres.
When the measuring system is installed in the explosion protection enclosure, which means that it
meets explosion protection requirements, the properties of the measuring system will no longer be as
they were originally.
Following the specifications in the
that manual meet the application-specific requirements.
Fail-safe usage requires additional measures and requirements. Such measures and requirements
must be determined prior to initial commissioning and must be taken and met accordingly.
2.7 Warranty and liability
The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of TR Electronic GmbH
always apply. These are available to the operator with the Order Confirmation or when the contract is
concluded at the latest. Warranty and liability claim in the case of personal injury or damage to property
are excluded if they result from one or more of the following causes:
• Non-intended use of the measuring system.
• Improper assembly, installation, start-up and programming of the measuring system.
• Incorrectly undertaken work on the measuring system by unqualified personnel.
• Operation of the measuring system with technical defects.
• Mechanical or electrical modifications to the measuring systems undertaken autonomously.
• Repairs carried out autonomously.
• Third party interference and Acts of God.
 TR Electronic GmbH 2023, All Rights Reserved
Page 38 of 55
marking on the nameplate.
User Manual.
User Manual, please check whether the properties defined in
TR-ECE-BA-DGB-0175 v01
Printed in the Federal Republic of Germany
10/24/2023