TR-Electronic CD 75 Serie Gesamt-Bedienungsanleitung Seite 295


In order to save the input data in the fail-safe data block IN_DataEncSafety,
the tags for "Position-Multiturn", "Position-Singleturn" and "Speed" must also be
defined in the data block. To do this, go to Project tree and in the directory tree
select the entry CD_75_-EPN_PROFIsafe -> PLC_1 [CPU 1511F-1 PN] -
> Program blocks -> IN_DataEncSafety [DB2] by double-clicking with
the left mouse button. The data block editor opens in the work area.

The following tags are defined in the data block editor for storage of the
measuring system input data:
Printed in the Federal Republic of Germany
08/06/2021

Position-Multiturn:
Name: Safety_Multi
Data type: Int
Start value: 0

Position-Singleturn:
Name: Safety_Single
Data type: Int
Start value: 0

Speed:
Name: Safety_Speed
Data type: Int
Start value: 0
TR-ECE-TI-DGB-0292 v02
 TR-Electronic GmbH 2016, All Rights Reserved
Page 121 of 159