TR-Electronic CD 75 Serie Gesamt-Bedienungsanleitung Seite 272

Safety Program Creation - Configuration Example

In the hardware catalog, with the "Filter" option set, select the 70 W power supply
by double-clicking with the left mouse button on the 6EP1332-4BA00 symbol.

The power supply is added to the mounting rail. The hardware components in the
mounting rail are now complete.
In the next step the appropriate GSDML file for the measuring system must be
installed. To do this, copy it to the corresponding installation directory of TIA Portal
V13 with the relevant bitmap file. You should note that the directory structure can vary.
 TR-Electronic GmbH 2016, All Rights Reserved
Page 98 of 159 TR-ECE-TI-DGB-0292 v02
Printed in the Federal Republic of Germany
08/06/2021