Electrical Connection; Cable Routing - Balluff BMP 01 P A P-Serie Betriebsanleitung

BMP 01- _P _ _ _ _ _A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic field positioning system
5
Installation and connection (continued)
Mounting example with position magnet
BAM TG-MP-028
Bild 5-15: Distances with position magnet BAM TG-MP-028
Bild 5-16: Mounting example
Mounting example with position magnet
BAM TG-XE-042
6,35 4
9
Bild 5-17: Distances with position magnet BAM TG-XE-042
Bild 5-18: Mounting example
14 english
5.4

Electrical Connection

BMP 01-...-P_ _-S75
2 4
1 3
M 8-4 (Class A)
Bild 5-19: Pin assignments for connector (pin side view)
Pin Wire color Signal
1 Brown +24 V (operating voltage UB+)
2 White Analog output: voltage 0...10 V /
current 4...20 mA
3 Blue GND (operating voltage UB-;
reference potential)
4 Black OUT1 (switching output S1) or C/Q
(IO-Link)
Tab. 5-1: Plug connector pin assignment
5.5

Cable routing

Magnetic fields
Ensure that there is sufficient distance between the BMP
and the holding cylinder and strong, external magnetic
fields.
Cable routing
Do not route the cable between the BMP, controller and
power supply near high voltage cables (inductive stray
noise is possible) and ensure EMC-compliant cable laying
or machine installation.
The cable must be routed tension-free.
Bending radius for fixed cable
The bending radius for a fixed cable must be at least three
times the cable diameter.
Cable length
Cable length max. 20 m.
For the analog output longer cables may also be used if
their construction, shielding and routing prevent noise
interference.
BMP 01-...-P_ _-S4
2
1
3
4
M 12-4 (Class A)