Flyer E-Bike Originalbetriebsanleitung Seite 181

• Regularly brake the brake pads free
if the cycling situation allows it by
braking hard/abruptly on longer
downhill slopes.
When installing or removing the corre-
sponding wheel set, you can damage
the disc brake.
• Have wheel sets with disc brakes
removed and installed by your
FLYER specialist dealer.
• Check the brake disc and brake pads for
wear (visual inspection).
„ Contact a FLYER specialist dealer if
you are unsure about the wear limit.
„ Have wear parts replaced by your
FLYER specialist dealer and then have
the disc brake readjusted.
• Have the hydraulics checked and ser-
viced by your FLYER specialist dealer
(see chapter 7.6 "Regular inspection").
Rim brakes
WARNING!
Risk of accident and injury
Brakes are safety-related components.
With incorrectly maintained or unmain-
tained brakes, accidents and serious
injuries can occur.
• Have your rim brake maintained regu-
larly and always by a FLYER specialist
dealer.
• Check the brake pads and rims for wear
(visual inspection).
„ Contact a FLYER specialist dealer if
you are unsure about the wear limit.
„ Have your FLYER specialist dealer
replace worn parts and then readjust the
rim brake.
• Have the hydraulics checked and ser-
viced by your FLYER specialist dealer
(see chapter 7.6 "Regular inspection").
Coaster brakes
• Check whether the torque arm is securely
and properly attached to the bike frame.
• Have the coaster brake checked by your
FLYER specialist dealer if unusual noises
occur or if the braking force seems to
decrease.
Derailleur gears
• Check whether you can shift through the
gears without any problems.
• Check whether the chain, gears and rear
derailleur are undamaged.
• Check whether the distance between
the chain and the rear derailleur and the
distance between the rear wheel and the
spokes are sufficiently large.
• Make sure that the rear derailleur is not
bent and is perpendicular to the pinions.
• Check the chain tension.
„ The chain may not sag.
„ Push the rear derailleur (the shifting unit)
towards the pedals and check if it moves
back to the original position by itself when
you let go.
• Have the gear shifting system serviced by
a specialist dealer if you notice unusual
noises or other problems when shifting or
if the chain repeatedly jumps off.
Hub gears
• Check whether you can shift through the
gears without any problems.
• Check whether the drive components are
undamaged.
• Have your FLYER specialist dealer
change the oil once a year (see chap-
ter 7.6 "Regular inspection").
• Have the gear shift serviced by your
dealer if you notice any unusual noises or
other problems when shifting gears.
Suspension components
• Check the suspension components for
correct and safe operation.
WARNING!
Risk of accident and injury
Suspension components are safety-re-
lated parts. Incorrect or lack of mainte-
nance can result in accidents and seri-
ous injuries.
• Have your suspension components
maintained regularly and always by
a FLYER specialist dealer.
181
DE