Special Functions Light And Sound - Faller 163701 Bedienungsanleitung

7.

Special functions Light and Sound

Various soldering pads allowing to equip your converted vehicle with addi-
tional functions for light and sound are located on both, the underside and
the upper side of the PCB.
NOTE:
For further information regarding the matching components LEDs and
ƒ
loudspeakers, please refer to the Chapter:
Protective resistors allowing to connect LEDs are standard features on
ƒ
the conversion PCB.
Activating special functions
With a built-in conversion PCB the vehicle will feature various light and sound
functions that can be activated via the Processor-controlled charging unit,
Art. 161349, called in the following "charging station", (depending on the
function only in conjunction with a digital control unit) or by wireless con-
trol on driving mode via the Car System Digital Master (Art. 161354) and a
matching input device (PC or digital control unit).
Switch the vehicle off.
X
Connect the vehicle to the charging station.
X
Switch the vehicle on.
X
Special functions Light and Sound
"Technical data".
EN
127