RTW SurroundControl 31960 Serie Bedienungsanleitung Seite 360

• Label/numeric font color
These two buttons each display the color selector for
changing the color of the label font and the numeric font
used for the M, s and i bargraphs.
• Channel
These text fields are used to enter individual names for
the three bargraphs of the sum group. While positioning
the mouse into the field you want to edit, use the right
mouse key to display the alphanumerical channel label
menu page and select individual names.
• Bargraph enabled
With these check boxes, each bargraph can be deactiva-
ted separately.
• Bargraph normal color
These buttons display the color selector for changing the
color of each bargraph in the sum group.
• Bargraph operation color
These buttons display the color selector for changing the
color of the working range of each bargraph in the sum
group.
• Bargraph over color
These buttons display the color selector separately for
every channel for changing the color of the over range of
each bargraph in the sum group.
• Bargraph background color
These buttons display the color selector separately for
every channel for changing the background color of each
bargraph in the sum group.
EN-148 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
• Numerical enabled
With these check boxes, the numerical displays of the s
and i bargraphs can be deactivated.
• Peakhold enabled
With these check boxes, the peak hold displays of the M,
s and i bargraphs can be deactivated.
• Channel Weighting Format 5.1
For 5.1 mode, the weighting of each individual channel for
the calculation of the M, s and i bargraphs can be varied
with this option.
• The levels can be set between –3 and +3 dB in steps
of 0.5 dB for the channels Left, right, center, Left
surround and right surround.
For the channels Left, right and center, the
•
default value is 0.0 dB.
For the Left Surround and right surround
•
channels, the default value is 1.5 dB.
In the LFE combo box, the available options are: Off
•
(LFE channel not used for calculation), 0 dB (LFE
used for calculation with 0 dB) and 10 dB (LFE used
for calculation with additional gain of +10 dB). The
default value is Off.
nOte - For 2 channel stereo mode, only the list
boxes for the Left and the right channels are available.
• Close
This button closes the page and returns you to the loud-
ness settings menu page from where you entered the
sum group menu.
SurroundControl 31900/31960 Series