The Vsc Instrument; Changing The Parameters Of The Vectorscope - RTW SurroundControl 31960 Serie Bedienungsanleitung

8.4 | The VSC Instrument
The VSC instrument is always displayed in window 3. To set
the focus on this instrument (indicated by a highlighted frame
around the window), simply press the instr key. With the
focus on window 3, the VSC functions are displayed in the
Toolbar (window 1).
The Audio Vectorscope (Lissajous display) is a 2-channel dis-
play mode available in the surround modes and for the Stereo
channel pairs of the Multi-Channel and 2-Channel Stereo mo-

8.4.1 | Changing the parameters of the Vectorscope

It is possible to customize some of the display elements shown in the vectorscope.
Please proceed as follows to access the respective menu from normal display operation:
Press Menu. The unit changes to menu mode.
1.
Select the edit selected preset button.
2.
3. Select the Vectorscope menu tab. The Vectorscope
settings menu is shown.
4. Edit the options you want to change.
Select the save & exit button to store the changes and
5.
leave the menu. The save Preset menu page is displayed.
SurroundControl 31900/31960 Series
des. It shows the phase relationship between one selectable
channel pair at a time. This display mode also features a phase
meter for the two channels selected. In Surround modes the
VSC instrument can be switched to a four channel display
devided into two sections: the upper one showing the L/R
channels and the lower one the LS/RS channels including the
corresponding phase meters. The Vectorscope display is not
available in the 2-channel, 4-channel, 6-channel and 8-channel
modes.
Channel designation
The signal vectors of the Lissa -
jous figure have their common source in
the center of the graph
2-channel audio vectorscope for
real time display of the stereo signal
(Lissajous figures). In Surround
mode, a 4-channel display is also
available
Phase meter for selected channel
pair
6. Select a User Preset of your choice to store your settings
in.
Select the change name button to edit the preset name.
7.
A keyboard display is shown to enter a new preset name
(6 characters maximum).
Select the save & exit button again. All changes are
8.
stored and the unit returns to normal operation.
8 | Instruments (Display Modes) | 8.4 | The VSC Instrument
EN
EN-65