RTW SurroundControl 31960 Serie Bedienungsanleitung Seite 353

• Operation indicator area
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This list box sets the area over which the indicator for the
operating area is activated. You can enter values between
–20 dB and 0 dB. A setting of 0 dB corresponds to 0 dBr.
The standard setting is 0 dB.
• VU-Lead
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This list box is for setting the lead for the VU display. You
can enter values between 0 dB and 10 dB.
• Grid Color
This button displays the color selector for changing the
color of the scale grid for the bargraph display.
• Label/scale/numeric font color
These three buttons each display the color selector for
changing the color of the label font, the scale font and the
numeric font used in the peakmeter display.
• Bargraph enabled
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
With these check boxes the display of each bargraph can
be deactivated separately for every channel in the peak-
meter display.
• Bargraph over color
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
These buttons display the color selector separately for
every channel so that the color of the over range of each
bargraph in the peakmeter display can be changed.
• Bargraph operation color
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
These buttons display the color selector separately for
every channel so that the color of the working range of
each bargraph in the peakmeter display can be changed.
SurroundControl 31900/31960 Series
• Bargraph normal color
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
These buttons display the color selector separately for
every channel so that the color of each bargraph in the
peakmeter display can be changed.
• RMS indicator color
This button displays the color selector so that the color of
the RMS indicator of the bargraphs in the peakmeter dis-
play can be changed.
• Bargraph background color
These buttons display the color selector separately for
every channel so that the background color of each bar-
graph in the peakmeter display can be changed.
• Tracklayout
(Does ONLY apply for Peakmeter – Channel Group 1 in
Surround modes)
This combo box is for selecting the channel sequences
of the bargraphs for the individual channel groups. The
selection options are available for the 5.1 surround for-
mat, for the formats 3.1, 6.1 and 7.1 the track layout is
displayed:
• 3.1: 3.1
• 5.1: SMPTE.TV: L.R.C.LF.LS.RS
SMPTE.FILM: L.LS.C.RS.R.LF
DTS: L.R.LS.RS.C.LF
FILM: L.C.R.LS.RS.LF
L,C,R,LF,LS,RS
• 6.1: DTS: L.C.R.LS.CS.RS.LF
• 7.1: SMPTE: L.LC.C.RC.R.LS.RS.LF
For the selection of the format use the Mode combo box
of the Key 1 to Key 7 menu pages.
• SPL Reference indicator
With this option, a spot indicator can be activated for each
bargraph of the channel group showing the SPL measure-
ment in each channel.
• Close
This button closes the menu page and returns you to the
menu page from where the channel group was selected.
9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
EN-141