Tail-Light (With Stop Light); Number Plate Light (Bulb Replacement); Indicator Lights - Malaguti CIAK 125 Bedienungs- Und Wartungsanleitung

6.4 TAIL LIGHT (with stop light)
To reach the stop light bulb just remove the two screws fixing the lens
(V - Fig. 31).
When reassembling the lens, be careful not to tighten the screws too
much. Otherwise, small cracks might appear and eventually break the
tail light.
• Bulb 12V - 5/21W (A - Fig. 31).

6.5 NUMBER PLATE LIGHT (bulb replacement)

• Unscrew the nuts fixing the screws (V2) to support (B - Fig. 31).
• Unscrew the lamp body (C).
• Take the bulb out and replace it with a new identical one (12V - 5W).
EN
A
Fig. 31
V
B
36
V
2
Fig. 32
C
A

6.6 INDICATOR LIGHTS

• Front indicator (A - Fig. 32).
Bulbs 12V - 10W
• Rear indicator (B - Fig. 33).
Bulb 12V - 10W
Failure of one of the four indicators will be signalled by an
increased flashing rate of the indicator light on the
dashboard.
B
Fig. 33