Ducati MULTISTRADA 1000DS Bedienungsanleitung Seite 148

Mobile headlight fairing
Loosen the four screws (1) that secure the mobile
headlight fairing to the supports with seal (2).
Remove the mobile headlight fairing together with
windshield ( fig. 41).
To change the windshield, with the suitable torx wrench
loosen the screws (3) with nylon washer (4), lock rubber-
coated nuts (5) from the inside (fig. 41a).
While fitting the new windshield, tighten the screws (2)
starting from the center one.
E
Check that the seals (2) are on the supports then position
the mobile headlight fairing and secure it on either sides
with screws (1).
Tighten screws (1).
54
2
1
5
4
3
fig. 41
fig. 41a