Causes Of Faults And Remedies; Optical Displays - TR-Electronic CMx-58 Serie Benutzerhandbuch

Causes of faults and remedies

12 Causes of faults and remedies

12.1 Optical displays

Green LED
Off
Flashing
On
© TR-Electronic GmbH 2007, All Rights Reserved
Page 132 of 135
Cause
Voltage supply absent or was
fallen below
Hardware fault,
measuring system defective
No allocation to a master
- exchanged CAN lines
- interrupted CAN lines
- duplicated NODE-ID in the
network
Measuring system ready for
operation
TR - ECE - BA - DGB - 0066 - 04
Remedy
- Check voltage supply wiring
-
Does the voltage supply is in the permitted
range?
Replace measuring system
- Adjusted baud rate must agree with the master
baud rate!
- Check CAN lines
- Make sure that each NODE-ID is present only
once in the network
-
Printed in the Federal Republic of Germany
01/21/2009