Hook-On Battery Door Removal And Installation (O) - Jungheinrich EFG 213 Betriebsanleitung

5.8

Hook-on battery door removal and installation (o)

CAUTION!
Trapping hazard
Trapping hazard when removing and installing the battery door.
When removing and installing the battery door do not put your hands between the
door and the chassis.
Wear safety shoes.
Z
Only for trucks with a roller conveyor.
Battery door removal
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 99).
– Battery disconnected.
Procedure
•
• Open the battery door by moving the
handle (77) up.
• Lift the battery door slightly to the outside.
• Pull the battery door up
• Put the battery door down securely.
The battery door is now removed.
Battery door assembly
Requirements
– Park the truck securely, (see "Parking the
truck securely" on page 99).
– Battery disconnected.
Procedure
• Insert the battery door in the receptacles (78).
• Push the battery door onto the truck.
• Push the battery door down and engage it in
the bracket (79).
The battery door is now assembled.
Z
If the battery door is not closed correctly, the truck will not be released for travel.
Information message (1918) is displayed.
72
77
78 79