Truck Capacity Plate - Jungheinrich EFG 213 Betriebsanleitung

4.3

Truck capacity plate

CAUTION!
Accident risk from fork replacement
If you replace the forks with ones that differ from the originals, the capacity will
change.
When replacing the forks you must attach an additional capacity plate to the truck.
Trucks supplied without forks are given a capacity plate for standard forks (length:
1150 mm).
The capacity plate (22) gives the capacity (Q in kg) of the truck for a vertical mast.
The maximum capacity is shown as a table with a given load centre of gravity D (in
mm) and the required lift height H (in mm).
The capacity plate (22) of the truck indicates the truck's capacity with the forks as
originally supplied.
Example of how to calculate the maximum capacity:
For a load cente of gravity D of 600 mm and a maximum lift height h
maximum capacity is Q 1105 kg.
Lift height restriction
The arrow shape markings (42 and 43) on the
inner and outer masts show the driver when the
prescribed lift limits have been reached.
36
h3 (mm) Q (kg)
4250 850 850
3600 1105 1105
2900 1250 1250
D (mm) 500 600
600
850
850
700
of 3600 mm the
3
42 43