Removal And Installation Using A Multi-Adapter (O) - Jungheinrich EFG 213 Betriebsanleitung

5.4

Removal and installation using a multi-adapter (o)

CAUTION!
Trapping hazard
Trapping hazard when replacing the battery.
When replacing the battery do not reach between the battery and the chassis.
Wear safety shoes.
Battery removal and installation
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 99).
– Battery exposed, (see "Exposing the battery" on page 50).
– Battery disconnected.
Tools and Material Required
– Multi-adapter
– Battery trolley with six rollers
– Pallet truck with a fork length of 1150 mm
Procedure
•
• Push the pallet truck with the multi-adapter
as far as the stop (68) underneath the
battery.
• Set the multi-adapter to the straight-ahead
position using the alignment
(69).
•
• Raise the pallet truck until the multi-
adapter is up to
the height stop (70).
• Prevent the pallet truck from rolling away.
• Undo the battery lock (63).
•
• Pull the battery (71) out by its handle.
• The battery trolley must engage securely in
the safety catch (72).
• Lower the pallet truck slightly to move it.
The battery is now removed and can be taken
to the charging station for charging.
68 69
70
63
71
72
65