Technical Specifications - Jungheinrich EFG 213 Betriebsanleitung

Emergency Stop safety feature
If the system recognises a fault in the steering, an emergency stop
is automatically introduced. The truck brakes to a halt, the travel direction does not
change.
An event message is shown in the control and display unit. The truck performs a self-
test
whenever it is switched on. Travel is only enabled again
when the truck is operational and the parking brake (= emergency stop) released.
Hydraulic system
A multi-pilot valve allows for sensitive operation of the functions via the controls. A
speed-controlled hydraulic pump ensures a proportionate and efficient supply to the
hydraulic functions.
Mast
Two or three-stage masts, optionally with free lift function; narrow mast sections
ensure excellent visibility of the forks and attachments. Fork carriage and mast run
on permanently lubricated and hence maintenance-free support rollers.
Attachments
The trucks can be optionally fitted with mechanical and hydraulic attachments.
3

Technical Specifications

All technical details refer to standard trucks.
Values indicated with *) may vary, depending on the
types of equipment used (e.g. mast, cabin, tyres etc.).
Z
Technical data specified in accordance with VDI 2198.
Technical modifications and additions reserved.
18