Jungheinrich EFG 213 Betriebsanleitung Seite 122

Safety notices for fork extensions:
WARNING!
Unsecured and excessive fork extensions can cause accidents.
For fork extensions with an open cross sectional area, only carry loads that are
resting along the entire length of the fork extension.
Only use fork extensions with the same fork cross section and minimum fork length
of the truck and which comply with the details on the fork extension data plate.
The basic fork length must be at least 60% of the length of the fork extension.
Lock the fork extensions onto the basic forks.
When carrying out the daily checks and operations before starting, (see "Checks
and operations to be performed before starting daily operation" on page 87), also
check the fork extension lock.
Mark any fork extensions with an incomplete or faulty lock and take them out of
service.
Do not use trucks with an incomplete or faulty fork extension lock. Replace the fork
extension.
Only restore the fork extension to service when the fault has been rectified.
Use only fork extensions which have no dirt or foreign bodies near the entry
opening point. Clean the fork extensions as required.
119