Loading With Another Industrial Truck - Jungheinrich EFG 213 Betriebsanleitung

2.3

Loading with another industrial truck

WARNING!
The truck can be damaged
The truck to be loaded can get damaged when loading with another industrial truck.
Only trained specialist personnel should load the truck.
Use only trucks with sufficient capacity for loading.
Only for loading and unloading.
The forks of the second industrial truck must be sufficiently long
Transporting over long distances prohibited.
Loading the truck with a second industrial truck
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 99).
Procedure
• Raise the truck with the forks at the side between the axles.
• Raise the truck slightly and make sure it is securely positioned on the forks. If
necessary adjust or secure the forks with stops.
• Carefully load/unload the truck, (see "Lifting, transporting and depositing loads" on
page 107).
• Lower the truck slowly onto the ground and prevent it from rolling away.
The truck is now loaded.
41