Werbung
4.2.1.2 Clamping ring versions
Clamping ring on the front:
With this type of mounting, the clamping ring is located between the measuring system and the
attachment, i.e. on the side of the flange.
Figure 6: Example for clamping ring on the front
Clamping ring on the back:
With this type of mounting, the clamping ring is located behind the measuring system and is therefore
opposite the attachment.
Figure 7: Example for clamping ring on the back
TR Electronic GmbH 2023, All Rights Reserved
Printed in the Federal Republic of Germany
10/24/2023
TR-ECE-BA-DGB-0175 v01
Page 49 of 55
Werbung
