Werbung
8.3.3.3 Preset affects XIST1
Alternatively, this parameter can also be set during operation via an acyclic parameter access to the
function control PNU 65004 Bit 2, see Page 135.
Selection
Value Description
enable
disable
8.3.3.4 Scaling function control
Alternatively, this parameter can also be set during operation via an acyclic parameter access to the
function control PNU 65004 Bit 3, see Page 135.
Selection
Value Description
disable
enable
8.3.3.5 Alarm channel control (V3.1)
see also chapter "PROFINET diagnosis alarm" on page 145.
This parameter is only supported in compatibility mode V3.1. In standard mode V4.2, the
profile-specific control via the alarm channel is always active.
Alternatively, this parameter can also be set during operation via an acyclic parameter access to the
function control PNU 65004 Bit 4, see Page 135.
Selection
Value Description
disable
enable
Printed in the Federal Republic of Germany
07/21/2022
The preset function, see page 130, is applied to the position
output in G1_XIST1, if enable is set in the parameter
0
Encoder Class 4 functionality.
The preset function has no effect on the position output in
1
G1_XIST1.
0
Scaling function control switched off
The scaling function control with the parameters Measuring
units per revolution (LSB) and Total measuring
1
range (LSB) is applied if enable is set in the parameter
Encoder Class 4 functionality.
The profile-specific diagnosis is switched off if enable is set
under the parameter Encoder Profile V3
0
Compatibility. Only the communication-specific alarms
are sent via the alarm channel.
The profile-specific diagnosis is switched on if enable is set
under the parameter Encoder Profile V3
Compatibility. The measuring system-specific alarm
channel is transmitted as a channel-related diagnosis.
1
This means that the data volume to be transferred can be
limited in clock synchronous mode. In addition to the
communication-specific alarms, encoder profile-specific
errors are also transmitted, e.g. a memory error (0x9000) or
a position error (0x900A).
TR-ECE-BA-DGB-0132 v21
Default
X
Default
X
Default
X
TR-Electronic GmbH 2017, All Rights Reserved
Page 121 of 168
Werbung
