Werbung
SUMMARY
4. bring the lower bead breaker roller closer by pressing the lower bead breaker arm lift button (Fig. 81 ref. B);
5. only now turn the wheel clockwise pressing the pedal (Fig. 7 ref. A) and at the same time push the button (Fig. 81 ref. B), keeping it pressed until
there's room enough for the bead breaking;
During this operation be careful not to deform the tyre side.
During the rotation of the tyre, abundantly grease the inside of the bead (Fig. 89).
During lubrication, do not push too deep on the tyre sidewall.
6. once bead breaking has been completed in the lower part, move lower bead breaker roller to rest position operating the push button (Fig. 5 ref. G2).
The roller re-enters automatically nullifying the approaching movement described at point 3). This automatism can be applied on both arms.
Until both upper and lower rollers do not re-enter, is not possible to carry out a new diameter adjustment.
KENDO - KENDO.EVO
Fig. 88
Fig. 89
7105-M019-00
EN_63
Werbung
