Werbung
SUMMARY
7. for wheels with alloy rims, use the proper plastic guard (Fig. 79 ref. 1);
8. at the end of the operations, loosen the locking shaft releasing first the cone using the larger outside levers and then moving the ring nut and the cone
away from the rim with the small levers;
9. lower the locking shaft to release it from its seat, turn it 90° counter-clockwise and extract it from the hole using the handle.
Never leave the wheel fitted on the equipment for a period longer than necessary for doing the work and never leave it unattended.
1.1.1 Reversed wheels pan protection
In case reversed wheels are used, in order to protect the rim, apply on the rubber platform a protection (Fig. 80 ref. 1), supplied. We suggest replacing
it if there are visible damages (see Fig. 80).
4
3
2
KENDO - KENDO.EVO
1
1
Fig. 78
Fig. 79
Fig. 80
7105-M019-00
EN_59
Werbung
