Device Description File; Bus Status Display; Indicator States And Flash Rates - TR-Electronic LA Serie Gesamt-Bedienungsanleitung

Commissioning
5 Commissioning

5.1 Device description file

The XML-based XDD-file contains all information on the measuring system-specific
parameters and the operating modes of the measuring system. The XML file is
integrated by the POWERLINK network configuration tool, in order to enable correct
configuration and commissioning of the measuring system.
The XML file is called "0000025C_TR_Lx46-LMP30_V01xx.xdd".
Download:


5.2 Bus status display

The POWERLINK measuring system is equipped with four diagnostic LEDs.
Figure 15: POWERLINK diagnostic LEDs

5.2.1 Indicator states and flash rates

LED
ON
OFF
Flickering
Blinking
Single flash
Double flash
Triple flash
Table 4: LED indicator states
 TR-Electronic GmbH 2008, All Rights Reserved
Page 138 of 203
www.tr-electronic.de/f/TR-ELA-ID-MUL-0015
Description
constantly ON
constantly OFF
Equal ON and OFF times with a frequency of approx. 10 Hz:
ON = 50 ms, OFF = 50 ms. Alternately red LED / green LED.
Equal ON and OFF times with a frequency of approx. 2.5 Hz:
ON = 200 ms, OFF = 200 ms. Alternately red LED / green LED.
One short flash, approx. 200 ms ON,
followed by a long OFF phase, approx. 1000 ms.
A sequence of two short flashes, approx. 200 ms ON/OFF,
followed by a long OFF phase, approx. 1000 ms.
A sequence of three short flashes, approx. 200 ms ON/OFF,
followed by a long OFF phase, approx. 1000 ms.
TR - ELA - BA - DGB - 0008 - 06
LMP-30 LA-46 / LP-46
Printed in the Federal Republic of Germany
10/12/2018