Clamping The Wheel On The Turntable - Corghi Artiglio 5000 Betriebsanleitung

6.4. CLAMPING THE WHEEL ON THE
TURNTABLE
- Insert the clamping handle in the central hole of the
wheel (Fig. 23)
- Turn the handle to engage correctly with the turntable
(Fig. 23a)
- Manually move the centring cone into position against
the wheel by moving the retainers "1" (Fig. 23b)
- Tighten the clamping device by turning the handle
clockwise (Fig. 23c)
110
1
Artiglio 5000 Operator Manual
23
23a
23b
23c