Corghi Artiglio 5000 Betriebsanleitung Seite 116

further
- After hooking onto the bead (Fig, 39), release
the button
rest position.
- Operate the lever
movable tool until the horizontal line on
the tool is completely visible (Fig. 40-41).
- Ensure that the bead of the underside of
the tyre is completely broken. If not repeat
the procedure to break the bottom bead.
- Ensure that the bead situated at 180° rela-
tive to the tool is in the well. If not, use
the bead depressor tool to position the
bead correctly.
- Turn the selector
- To facilitate the demounting process, push and lift the tyre with the lower bead
breaker disc as needed to take the load off the mobile hook.
116
.
to return the tool to the
to raise the
(Fig. 42).
41
Artiglio 5000 Operator Manual
38
39
40
42