Corghi Artiglio 5000 Betriebsanleitung Seite 114

the working area, and raise the entire unit out
of the work area.
The arm may be extended with the lever (fig. 30)
to further clear the work area of any obstructions.
3- Applying the lower bead breaker .
- Operate the lever
ing unit to raise the unit from the rest position to
the working position (Fig. 31).
NB: The correct horizontal position of the lower
arm is attained automatically when the upper
arm is positioned correctly.
A gap of 2-3 mm should be left between the edge
of the wheel and the bead breaker disc.
4 – Breaking the lower bead.
- Operate the lever
breaker disc (fig. 32).
A preload compressing the tyre by approximately
5 mm is recommended.
- Press the lower bead breaker disc penetration
button
114
30
of the lower bead break-
to preload the bead
(Fig. 33)
Artiglio 5000 Operator Manual
31
32
33