D Technical Data - Corghi Artiglio 5000 Betriebsanleitung

current;
• install protection fuses on the power line
that are suitably sized in accordance with
the indications provided on the machine
data plate (Fig. 1);
• connect the machine to an industrial
socket; the machine must not be con-
nected to domestic sockets.
An effective grounding connection is essential for correct operation of the machine.
Make sure that the available pressure and performance of the compressed air system
are compatible with what is necessary for correct machine operation - see the section
"Technical data". For correct machine operation, the compressed air supply line must
provide a pressure range from no less than 8.5 bar to no more than 16 bar and guarantee
an air flow rate greater than the average consumption of the machine, which is equal to
140 Nl/min (see technical data).
For correct equipment operation, the air produced must be suitably treated (not
above 5/4/4 according to ISO 8573-1).

1.2.d TECHNICAL DATA

- Compatible tyre types: CONVENTIONAL – LOW PROFILE - RUN FLAT - BALOON - BSR
- Wheel dimension range:
• wheel diameter ............................................................................................ from 13" to 28"
• maximum tyre diameter .............................................................................. 1200 mm (47")
• maximum tyre width .....................................................15" (from wheel mating surface)
- Turntable:
• ............................................................................................................. resting side: flanged
• centring ..................................................................................................................... on cone
• clamping .................................................................................................................... manual
• drive system .................................................................................. 2-speed motor-inverter
• rotation torque ........................................................................................................1200 Nm
Artiglio 5000 Operator Manual
CAUTION!
CAUTION!
A
2
EN
91