Wheel Loading - Corghi Artiglio 5000 Betriebsanleitung

hole A where the curvature is less pronounced B. On
these wheels the bead must first be broken in the area
of the valve hole, on both the top and bottom sides.
Wheels with pressure sensor - Fig.18D. To work cor-
rectly on these wheels and avoid damaging the sensor
(which can be incorporated in the valve, secured to
the belt, glued inside the tyre, etc.) suitable mount-
ing/demounting procedures must be observed (refer
to "Approved mounting/demounting procedure for
runflat and UHP tyres").
Remove the old weights from the rim before starting work operations.

6.3. WHEEL LOADING

Only use the lifter pedals when loading and unloading the wheel.
Do not press these pedals during any other procedures!
- Load the wheel onto the wheel
lifter (Fig. 19).
108
CAUTION!
CAUTION!
A
B
A
Artiglio 5000 Operator Manual
C
18C
B
C
18D
19