Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating
Loading staples
- Unplug the tool from mains supply
- Press the locking lever down and slide the feeder backwards out of the tool.
- Insert staples into the front of the tool like shown in the drawing (max. 120, shorten longer
strips).
- Slide the feeder in till he stops. Ensure locking lever is fully engaged (see Picture below at left)
staple strip, opening upstairs
locking lever
Loading nails:
- Unplug the tool from mains supply
- Press the locking lever down and slide the feeder backwards out of the tool.
- Insert the nail strip into the front of the tool at the left side (see following drawing)
- Slide the feeder in till he stops. Ensure locking lever is fully engaged (see Picture above at left)
13
Werbung
Inhaltsverzeichnis
