Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not overload your Tool You have more success und work safety in defined rate
Take the correct staples and nails. Incorrect staples and nails can damage the tool and
the workpiece. High risk of accident! Do not use the tool for not permissibled work.
Use safety clothes
Do not wear wide clothes or jewelery. These can hit by moving parts. Put on nonslip
shoes by working on slippery ground. Use a hairnet, if you have long hair.
Do not use the tool without a pair of goggles, mask, ear protection and safety gloves
Do not misuse the cable
Do not carry the tool with the cable. Do not use the cable to pull out the plug
from the wall socket. Protect the cable to heat, oil and sharp edges.
Do not overexpand your standing position
Avoid abnormal posture. Ensure to safety standing position and hold your
constant balance .
Service your tool
Keep your tool clean for safety and succesful work. Follow the instructions for
maintenance and changing the staples/nails. Check periodical the power plug and the
cable. If they are defective, take them to an electrician. Check periodical extension
cables and replace defictive cables. Keep handles dry and free from oil and grease.
Do not use the tool when casing is damaged or parts are missing.
Pull the plug
Pull the plug from wall socket, if the tool is not in use, by maintenance and
changing staples/nails.
Avoid unindentional start of the engine
Ensure the switch is safed before you plug in the supply plug
Be carefully
Observe your work. Do not work, wenn you`re not concentrated, be drunken or feel ill.
Never point the tool to yout body, other persons or animals
Secure the working pieces with suitable clamps
Outdoor Extension cable. In the open take only marked cables for outdoor use.
Repairing only by qualified personnel
This tool ist according to relevant safety rules. Repairs be allowed to do by qualified
personnel (Electrician). Otherwise it may be caused accidents.
12
Werbung
Inhaltsverzeichnis
