Panasonic AW-PH360L Bedienungsanleitung Seite 42

Connections
@When the unit is to be connected to a personal computer using the IEEE1394 cable, and
the camera and pan/tilt head are to be controlled by the personal computer
Nominal cross section
1.25 mm
AC adapter:
AW-PS300A
• Use the pan/tilt head cable (AW-CA50E29) to connect the unit with the convertible
camera containing the plugged-in IEEE1394 card.
• Set controller selection switch SW1 to the right side (RP501), and select the
transmission signal selection setting that supports the analogue/IEEE1394 card.
• Use the IEEE1394 cable to connect the unit with the personal computer (Windows).
• Install the driver software and control software from the floppy disk supplied with the
IEEE1394 card in the personal computer (Windows).
• Check that the pan/tilt head and camera can be controlled by the personal computer
(Windows) using the control software.
For further details, refer to the IEEE1394 card instructions.
Pan/tilt head cable
(AW-CA50E29)
2
or more
IEEE1394 cable
(max. 4.5 m)
- 41 (E) -
Personal computer
(Windows)