Herunterladen Inhalt Inhalt Diese Seite drucken

Panasonic AW-PH360L Bedienungsanleitung Seite 32

Vorschau ausblenden Andere Handbücher für AW-PH360L:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 52
Connections
6When the camera and pan/tilt head are to be controlled by the AW-RP505 control panel
for transmitting SDI signals
Coaxial cable
Nominal cross section
1.25 mm
AC adapter:
AW-PS300A
• Use the supplied camera cable to connect the unit with the convertible camera containing the
plugged-in SDI card (such as the AW-PB504).
• Use a coaxial cable to connect the SDI card's SDI OUT connector with the unit's SDI IN
connector. Adjust the cable to a length at which the pan/tilt head will move smoothly.
• Set controller selection switch SW1 to the right side (RP501), and select the transmission signal
selection setting that supports the SDI card.
• Use a 10BASE-T straight cable (UTP category 5) to connect the unit's CONTROL IN IP/RP
connector with the multiport hub's PAN/TILT CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the unit's CAMERA
CONTROL IN connector with the multiport hub's CAMERA CONTROL OUT connector.
• Use a 10BASE-T straight cable (UTP category 5) to connect the multiport hub's PAN/TILT
CONTROL IN connector with the controller's PAN/TILT CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the multiport hub's CAMERA
CONTROL IN connector with the controller's CAMERA CONTROL OUT connector.
• Use a coaxial cable to connect the unit's Pr/SDI OUT connector with the colour monitor's SDI
input connector.
• Check that the pan/tilt head and camera can be controlled by the controller.
Camera cable
(supplied)
2
or more
Coaxial cable (BBC No.PSF1/2M,
BELDEN 8281, max. 500 m)
Genlock signals must be supplied if
a multiple number of cameras and
pan/tilt heads are to be used.
Coaxial cable
(BBC No.PSF1/2M,
BELDEN 8281,
max. 200 m)
10BASE-T
(equivalent to UTP
category 5) straight
cable (max. 10 m)
10BASE-T
(equivalent
to UTP
category 5)
straight
cable (max.
500 m)
- 31 (E) -
Colour monitor
Multi hybrid control panel:
AW-RP505
Coaxial
cable (BBC
No.PSF1/2
M, BELDEN
8281, max.
10 m)
Multiport hub:
AW-HB505

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis