Cleaning And Maintenance; Internal Cleaning; External Cleaning; Maintenance By The Customer - Kärcher KM 100/100 R LPG Betriebsanleitung

Operating Instructions
Transport
Transport instructions
Note!
When the machine is loaded the
freewheel lever must generally be
engaged in its bottom position. Only
then are the drive system and the
parking brake operable.
Uphill or downhill the machine must
always be moved automotively.
! Turn ignition key to "0" and
remove it
! Drain the tank (applies only to
KM 100/100 R B)
! Close gas cylinder valve and
remove gas cylinder (applies only
to KM 100/100 R LPG)
! Store the gas cylinder in
compliance with the safety
requirement guidelines for LPG-
powered vehicles (applies only to
KM 100/100 R LPG)
! Secure the machine with wedges
on the wheels
! Secure the machine with stretch
belts or ropes
KM 100/100 R B / KM 100/100 R LPG
Fastening areas
Note:
Observe markings for fastening
areas on base frame! (chain
symbols)
For loading or unloading the
machine may be operated on slopes
of only up to a max. of 18 %

Cleaning and maintenance

! Stand sweeper on a flat surface
! Turn ignition key to "0" and
remove it

Internal cleaning

Danger!
Wear dust mask!
Wear safety goggles!
! Open unit cover, engage stay bar
! Clean with a rag
! Blow-out with compressed air

External cleaning

Clean with a damp cloth previously
soaked in mild suds
Note:
Do not use any aggressive cleaning
agents!
Maintenance intervals
Elapsed-time meter
Elapsed-time meter indicates
maintenance interval times.
Maintenance by the
customer
Daily maintenance
(KM 100/100 R B) or whenever the
gas cylinder is replaced
(KM 100/100 R LPG)
! Check the engine oil level
! Check axle drive oil level
! Check the tyre air pressure
! Check gas hoses and threaded
line joints. (applies only to
KM 100/100 R LPG)
! Check the gas filter in the
screwed connection to the gas
cylinder for dirt accumulation,
clean it, if necessary (during
every gas cylinder replacement).
(applies only to
KM 100/100 R LPG)
! Check the function of all
operating controls
Maintenance weekly
! Check petrol or gas lines for
leakages
! Check air filter
! Check oil level of sweeping
hydraulics
! Check hydraulic hose for leaks
! Check freedom of movement of
Bowden cables and moving parts
! Check setting and wear of
sealing strips in sweeping area
! Check vacuum system (operation
of lowering side brushes)
English
Maintenance every 100 operating
hours
! Check petrol or gas lines for
leakages
! Enging-oil change (first change
after 20 operating hours)
! Check the spark plug
! Check operation of seat contact
switch
! Checking the battery acid level
! Check tightness, wear and
operation of drive belts (V-belts
and round belts)
Maintenance according to degree
of wear
! Replace sealing strips
! Replacing the sweep roller
! Replacing the side broom
See maintenance tasks chapter for
description
Note:
Where maintenance is undertaken
by the customer, all service and
maintenance work must be carried
out by a qualified employee.
A Kärcher specialist dealer can be
consulted whenever support is
necessary.
33