Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FUNCTION OF contrdty
- SONY
CLOSED LOOP BUAL CAPSTAN
9:
@ Tension arms/automatic shut-off switches
These arms maintain uniform tape tension.
When
all the tapes
are wound
and these
arms
return
to the former
position, tape
transport mechanism will stop.
@ TIMER
switch
Usually set this switch to OFF.
To make timer-activated operation, set it to ON.
© TAPE SPEED
selector
19 cm (7 1/2 ips): For high quality recording
9.5 cm (3 3/4 ips) : For longer time recording
38 cm (15 ips): For studio quality professional recording
19 cm (7 1/2 ips) : For longer time recording
Tape speed in playback should be the same as that in recording.
@ REEL SIZE selector
:
Select the optimum
rewind
tension
and reel torque
for the reel
used: The "10" position is for 10 1/2-inch (27 cm) reels, and: 7"
is for 7-inch (18 cm) or 5-inch (13 cm) reels.
© POWER
switch
This turns the power on or off. The VU meters will light up when
the unit is turned on.
© VU meters
With the MONITOR
switch set at TAPE, the meters show the out-
put level adjusted by the PB LEVEL controls.
0 VU reading corre-
sponds to 0.435 V.
;
@ HEADPHONES jack
=
Insert low-impedance
headphones
to monitor the input and
re-
corded signals.
@ MIC jacks
Any low-impedance microphone equipped with a phone plug may
be used.
If your microphone is equipped with a mini plug, a plug
adaptor for converting to phone plug is required.
Werbung
