Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dimensions
Approx.
445 x 525 x 235 mm (w/h/d)
(17 1/2 x 20 5/g x 9 1/4 inches)
Including projecting parts and controls
Weight
Approx. 27 kg (59 Ib 8 oz)
Supplied accessories
Ree! adaptor and spacer RAD-11...... 2
Reel R-11A
1.2.0... .--...004. 21
Connecting cord RK-74H
.........
2
Head cleaning pen
.............
1
While
the information
given
is correct
at the time of printing,
"small
production changes in the course of our company's
policy
of improvement through reserch and design might not necessarily
be indicated
in the specifications.
We please ask you to check
-with your
appointed
Sony dealer if clarification on
any
point is
required.
TROUBLE CHECKS
The following
chart will help correct
most
problem
which
may
.
occur with the unit.
Before going through the check list below, first pay attention to
the following fundamental points.
@The power cord must be connected firmly.
@Connection to the amplifier must also be firm.
@ Heads, capstan and pinch roller should be cleaned.
@ The amplifier controls and switches should be set correctly.
Tape
does
not
move
even
when
function
buttons
are
de-
pressed.
@ There is slack in the tape.
Tape does not run even when the » button is depressed.
_ @The pause button is depressed.
When power is supplied, tape runs even though the » button
is not depressed.
@ The TIMER switch is set to ON.
:
Recording source cannot be monitored
in the playback mode,
when setting the MONITOR
switch to SOURCE.
@The REC MONITOR MUTE switch is set to ON.
During recording, there is a great volume
difference
between
SOURCE
and TAPE
settings of the MONITOR
switch.
@The PB LEVEL controls are set far beyond midpoint.
Unclear or distorted recording or excessive wow
and flutter
@Contamination
of the heads.
Poor S/N ratio during recording
@The REC LEVEL controls unused (MIC or LINE) should be turned
full counterclockwise.
Recording cannot be made.
@The REC MODE switches are not depressed.
@Check the INPUT SELECT switch.
No playback or decrease of sound reproduction
@Contamination of the playback head.
@The MONITOR switch should be set to TAPE.
At SOURCE posi-
tion, no sound is heard.
@Check the amplifier volume controls.
@Check the amplifier input selector.
@Check if the PB LEVEL controls are set to "0".
@Check the 2-track/4-track selector switch. (TC-766-2)
Too low microphone sound
@Set the MIC ATT switch at "0".
@ Use low impedance microphones.
No sound from the headphones
@Check the PB LEVEL controls.
Insufficient erasure
e@Contamination of the erase head
Oscillation occurs when trying to record from the amplifier
@lf the LINE OUT jacks of the tape deck are connected to the am-
plifier AUX jacks and if these are switched on, change the amplifier
input selector to another position.
15
Werbung
