Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MIC-AND-LINE MIXING
Connect
microphones
to MIC
jacks and
line source to LINE
IN
jacks.
While
listening
through
headphones,
adjust the
mixing
level by turning the respective controls of MIC-L, R, LINE-L, R. The
VU meters indicate the composite recording level of mic and line
_ inputs.
MIC- REC
LEVEL-
LINE
SOUND-ON-SOUND
RECORDING
While playing back the basic program monophonically recorded in
one channel, add a new
program
from a microphone
and record
the two programs in the other channel.
This enables you to record
a duet by yourself or create other special effects.
Sound-on-Sound
recording on the right channel (L > R)
1, Record the basic program
on the left channel
and rewind
the
tape.
2. Connect the L LINE OUT jack and R LINE IN jack by using the
supplied connecting
cord.
Be sure to use the plugs of the same
color at both ends of the connecting cord.
3. Connect a microphone into the R MIC jack.
4. Connect the headphones.
:
5. Push the R REC MODE switch.
6. Set the MONITOR switch to TAPE.
7. Adjust the recording level.
@) Temporarily set the
R LINE and R MIC controls to the indi-
cation "5",
:
@ Turn the R PB LEVEL control full counterclockwise and set
the L PB LEVEL control to the indication "5".
Depress the @ and » buttons.
Sing to a microphone
while
listening to the basic program through left headphone.
@ Rewind the tape.
Turn down the L PB LEVEL control full
counterclockwise and turn
up the R PB LEVEL control to the
indication "5",
Depress the ® button and monitor the mixed
sounds through right headphone.
(Recording level is indicated
in the R VU meter.)
@ Readjust the recording level as follows:
@To increase the whole recording level, turn the R LINE con-
trol clockwise beyond the indication "5", and to decrease, turn
it down.
@To increase the mic sound against the basic program, turn
gy:
LINE OUT (L)
LINE
IN (R)
Record head
Playba
LINE
OUT (L)
LINE
IN (R)
11
' i
H
Werbung
