Sony TC-765 Bedienungsanleitung Seite 10

PLAYBACK
For TC-766-2, check the 2-track/4-track selector switch.
When playing back a 2-track-recorded, tape > left (2-track)
When playing back a 4-track-recorded tape — right (4-track)
@ TIMER switch — OFF
@ POWER switch — Depress to ON.
@ Thread a tape.
@ Tape counter — Reset to [0000].
@ REEL SIZE selector — Set to the reel diameter to be used.
@ TAPE SPEED selector — Set according to the speed when re-
corded.
@ MONITOR switch — TAPE
© Depress the » button.
Now playback starts.
@ When playback completes, depress the lf button.
@In playback, TAPE SELECT switches have no effect.
ERASING
When the tape deck functions in record mode, the erase head
operates and any previous material is erased automatically. To
erase the recorded contents without recording:
@Turn the REC LEVEL controls (both MIC and LINE) full counter-
clockwise to "O".
@ Set the BIAS switch at the position appointed in page 8, or at
the HIGH position
And start the tape deck in record mode. ;
@For quick erasure, use a commercially available eraser.
10
TIMER-ACTIVATED RECORDING AND
PLAYBACK
Automatic recording and playback at any desired time is possible
using a commercially availabie timer. Continual operation may be
accomplished with a timer designed to turn the tape deck on and
off any number of times.
Recording
1. Set the tape deck TIMER switch to OFF.
2. Connect the tape deck power cord to the timer which has been
set for the desired time. ,
3. Perform the necessary steps for recording. (Be careful not to
depress the @ and > buttons.)
4. Set the tape deck TIMER switch to ON.
The tape deck is now ready for automatic start of recording at the
timer-set time. .
Playback F
Procedure is almost the same as that of recording.
@Be careful not to depress the REC MODE switches.
@Be sure to set the MONITOR switch to TAPE.
NOTE
@Read the instruction manual of the timer carefully before using
it.