General Notes - Malaguti SPIDER MAX GT 500 Diagnose-Handbuch

SPIDER MAX 500
6.

GENERAL NOTES

The central unit is equipped with an autodiagnostic system
connected to a led on the dashboard (letter K - F. 3).
The EMS injection-ignition system also has a control
function on the revolution counter and the radiator cooling
fan.
All anomalies can be detected and corrected by means of
the diagnostic multimeter (palmar instrument) code
08607500 (Piaggio code 020460Y).
In any case, once the anomaly is corrected it is
automatically deleted from the memory after 16 cycles of
use (start at cold engine, travel at warm engine, stop).
The diagnostic multimeter is fundamental also
to adjust the idling carburetion.
The EMS central unit supply is managed by the emergency
switch (E) and by the side stand switch (D) to ensure a
safe motorcycle operation.
To detect and solve any anomaly in the injection
system, along with the diagnostic multimeter also
use the testing wiring (code 08607600) (F. 6) supplied
by Malaguti S.p.A.
The above mentioned testing equipment allows carrying
out any check on the EMS central unit, even when the
motorcycle engine is running.
Place the testing wiring across the central unit connector
and the motorcycle system connector (see F. 6).
A = System connector
B = Central unit connector
All manuals and user guides at all-guides.com
F. 3
F. 4
F. 5
F. 6
36 12/04
D
E
B